banhead

spcr

The Multifit Heel Elevator

Designed by orthotists who required an economic and instantly adjustable ready-made heel raise. They wanted a heel wedge that eliminated the need for a large stock holding and that could be fitted instantly. Both criteria have been satisfied by the Multifit Heel Elevator.

This product has been proved to save time and money.

Each of the two sizes can be adjusted from 15mm down to 3mm just by peeling off 3mm layers. This unique orthosis can be used to rectify the uneven gait caused by leg-length discrepancies and Achilles Tendonitis repairs.

In some circumstances, it has also been found to reduce back pain associated with posture problems.
The Heel Elevator is bi-lateral and is sold singly.

Peel-Away Layers

Clinical trials have proved that 15mm of internal lift is the maximum depth accepted for normal footwear. Using the unique peel-away layers enables the Heel Elevator to reduce from 15mm to 3mm in intervals of 3mm. Due to the active nature of the adhesive, it is possible to reconstruct the layers during the fitting process.

Construction

A laminate consisting of firm EVA foam with an adhesive coating between the layers. The upper surface is covered with velour fabric and it is hand washable.

Shape

Because the layers peel from the underside of the Heel Elevator, the tapered leading edge remains the same irrespective of the number of layers removed, as does the upper fabric covering and the radiused back edge.

Size Guide. The Heel Elevator is available in the following sizes:-

UK Shoe Size

Width

Length

Product Code

3 - 8½

5.5cm (2⅛")

11.0cm (4⅜")

HE1

9 - 12

7.0cm (2¾")

13.0cm (5⅛")

HE2