 | Lower Limbs |
"Full Foot" versions
 Top of Page |
 The Multifit Universal Knee Support 
The Universal Knee Support has been developed to accommodate all knee circumferences in just two sizes, thus reducing the need for large costly stocks. This has been achieved by constructing the support in two over-lapping halves. Knees with great variation in their above- and below-knee dimensions can now be catered for. The support is bi-lateral and is manufactured in the UK in durable, washable, "cushion-soft", multi-stretch Neoprene.
|
Top of Page |
The Multifit One-piece Knee Brace
This brace is a single piece unit incorporating three enclosed aluminium splints for comfort and immobilisation. It is a lightweight design and the four touch 'n' close fastening straps with return loops provide a secure fit. The brace is made in black, and fits either the left or right knee. It is lined with a breathable padded white nylon mesh with additional protective foam padding positioned along each splint location. |
Top of Page |
The Multifit Three-piece Knee Brace
This brace provides an optimum fit through the adjustment and positioning of the three separate pieces of the brace. The centre back panel, with its three enclosed contoured aluminium splints, and the two detachable side panels, with their touch 'n' close connectors, can be set to the required fit. The side panels each incorporate an enclosed aluminium splint for limb comfort and reliable immobilisation. The four touch 'n' close fastening straps with their return loops ensure a secure fit. The white foam lining and black exterior nylon and vinyl surfaces are all perforated for better breathability and comfort. The brace fits either the left or the right knee. |
Top of Page |
Multifit Elastic Ankle Support
This white, breathable, elasticated ankle support incorporates a heel cut out for ease of fit and comfort. The lightweight slip-on support provides compression and protection without restricting mobility and can be worn in association with normal footwear. It is washable and fits either the left or the right ankle. |
Top of Page |
Multifit General Purpose Ankle Brace
This is a new ankle brace that uses a breakthrough combination liner to help support and protect unstable or injured ankles. It can be used with or without cold therapy but the liner can be removed and placed in the freezer then replaced in the outer shells to provide a cool compress helping to reduce some of the discomfort associated with ankle trauma. Additional sets of liners can be purchased separately so that one set can be cooled while the other is in use. The brace is available in two models that fit either the left or the right foot. The Acute Care Model is excellent for use after acute injury whereas the Trainer Model is ideal for extended wear on patients with chronic ankle problems. |
Top of Page |
Multifit Foam/Gel Ankle Brace
Bracing for the future! The Foam/Gel is the new ankle brace that uses a unique breakthrough combination of foam and gel to help support and protect unstable or injured ankles. The unique chambered lining system provides the ultimate in cushioned protection for your patients. The upper chamber is pre-inflated with air and encloses a foam pad to conform to the calf, and the lower chamber is filled with gel to mould to the malleoli. A custom fit is possible every time, even during high levels of activity, and the gentle compression reduces oedema associated with ankle trauma. The Foam/Gel is the perfect choice for hot and cold therapy: the dual-chambered lining can be removed and placed in a microwave or freezer to provide hot or cold compression for your patients. |
Top of Page |
Multifit Flex 'n' Fit Ankle Brace
The Flex 'n' Fit Ankle Brace provides a new treatment choice for acute ankle sprains and can be adjusted to suit the injury and required fit. It is available in a universal size for convenient stockholding and can be easily contoured to fit a variety of sizes. The Flex 'n' Fit is designed for long-term use and to fit inside a shoe. |
Top of Page |
Multifit Achilles/Alliance Ankle Strap
To expand the versatility of the Achilles/Alliance Drop Foot Orthoses, a detachable touch 'n' close ankle strap, which can easily be fitted to existing or new orthoses, is now available from stock. The universal strap can be trimmed to length and can be attached to fasten either left- or right-handed. It is washable, comfortable and allows a wider range of conditions and shoe types to be catered for. |
Top of Page |
The Multifit Achilles is the first fully adjustable, ready-made drop foot orthosis. Combining a successful research programme with proven design features means the Achilles can be fitted to a wide range of leg and foot sizes from a very small stock requirement. Designed and manufactured totally in the UK, the Achilles is vacuum-formed from a lightweight opaque white polymer with high fatigue resistance, and is also available in black for discreet wear with dark attire.
| |||||||||||||||||||||
Top of Page |
Economy The Multifit Economy is a highly effective, comfortable, drop foot orthosis with many features derived from the notably successful Achilles adjustable range but with economy very much in mind. It is vacuum-formed in the UK from a lightweight polymer of high fatigue resistance and is produced in a range of sizes. The Economy is available in an opaque white or black for discreet wear with light or dark attire. | ||||||||||||||||||||||||||||
Top of Page |
Alliance The Multifit Alliance is a fully functional, dynamic, drop foot orthosis with proven design features derived from our two successful orthoses, the Achilles and the Economy. It is vacuum-formed in the UK from a lightweight polymer of high fatigue resistance. The Alliance is produced in 4 sizes in left and right, and is available in opaque white, or black for discreet wear with dark attire. | ||||||||||||||||||||||||||||
Top of Page |
The Multifit Hallux-Valgus Support
The Multifit H.V. Support is an adjustable, corrective, lively orthosis for use post operatively and for the gentle and comfortable relief of symptoms accompanying hallux valgus and other similar painful conditions associated with the big-toe joint. The H.V. support is manufactured in lightweight, "cushion-soft", Neoprene and has many design advantages including usage by day or by night. It can be worn under suitable footwear and is machine washable for convenient, long-life hygiene.
| |||||||||||||||||||
Top of Page |
Supporter Orthopaedic Insert Soles
The greatest advance for years in foot comfort and support! Foot comfort is largely dependent on correct posture and weight bearing transmission during standing and walking. The condition of tender metatarsal heads (ball of foot) accompanied by fallen or weakened longitudinal valgus arch (inner arch of foot) often creates a change of weight-bearing areas as the sufferer attempts to "walk around" the tender and/or weak locations. This transfer of weight to areas not intended for it can lead to further physical complications, and so it is essential to provide support and/or light corrective pressure as soon as possible. Key features of these patented insert soles are:-
'Supporters' have been designed in three basic styles so that the potential wearer may choose the one most suitable for his or her condition. All three styles incorporate the moulded lip, shaped to "cup" the meniscus of the heel, and so to assist in maintaining correct linear position of the foot during weight bearing.
|
Back to the Product Catalogue
In addition, the Economy and Alliance lines are now available in